Assigning Simulation model to Components
The following steps leads to the assignment of Simulation parameters to a component which makes it simulatable in EDWinXP simulators
1. Open EDWinXP Main from Start-> Programs->EDWinXP version x.xx-> EDWinXP Main
2. Open the Schematic Editor (Mixed Mode Simulator)
3. Load the Component from the Browser say ADC08031.
4. From the Tool Menu choose Components.
5. Select Component Properties (Second Function tool) ->Reassign Simulation model (Third option tool).
6. Click on the Component (ADC08031)
The following window appears:
7. In the window which appears Click on the Tab Assign Simulation Function
8. Check the option Analog Models and Match No Pins.
9. Choose - ADC08031 – ResistorBank8 ANGPRIMITIVES.DLL, Click Accept.
10. Check the corresponding option depending on whether the component is analog or digital. Click on the desired Simulation function and click Accept
11. Click on each entry pin of the component and assign corresponding functions.
12. After assigning functions to all pins Click Accept.
